Users Manual

13
Issue date: 12/4/2018
Multiple receiver device setup with 2
nd
remote control:
If you intend to set up multiple receiver device at the same time then you will
need to use a 2
nd
remote control such as LYCT-505 or MYCT-1702 to set the
load level.
Firstly, make sure the 2
nd
remote control is also paired to each individual
receiver device that the one button remote control is already paired to.
Scene 1
1. With the 2
nd
remote control, set the desired load level status.
2. On the one button remote control slide function switch to position 3.
3. Press button once to store Scene Status 1.
4. Green LED flash 3 times  Amber LED flash 1 time to confirm Scene 1 is
stored.
LED 3 Times LED 1 Time
SCENE SETUP / SCENE CONTROL