Instruction Manual

Flex 12EPV/8EPV Standard, AB and Tandem Instruction Manual (FCC/CE)
September 2016
Page 17 of 43
4.1.6. Pushbutton Function Settings
1) Rotate the power switch key to OFF ( 0 ) position..
2) With the STOP button elevated, press and hold PB3 and PB4 at the same time.
3) Rotate the power switch key to ON ( I ) position.
4) Let go PB3 and PB4 at the same time (entered Pushbutton Function mode).
5) The Status LED displays current pushbutton function setting with orange, green and
red blinks. An orange blink represents the hundreds (+100), a green blink represents
the tens (+010) and a red blink represents the units (+001). For example, 1 orange
blink followed by 2 green blinks and 5 red blinks is pushbutton function no.125.
Pushbutton function number with “0” is represented by no orange, green or red blink.
For example, 1 orange blink followed by 5 red blinks is pushbutton function no.105.
6) Set pushbutton function number by pressing PB3 to increment the hundreds (+100),
PB2 to increment the tens (+010), PB1 to increment the units (+001), and PB4 to reset
(000 - constant orange). For example, press PB3 one time, PB2 four times, PB1 six
times is pushbutton function no.146 (Status LED blinks 1 orange, 4 greens and 6 reds)
7) Exit Pushbutton Function mode by rotate the power switch key to OFF ( 0 ) position.
4.1.6.1. Toggled Pushbutton with LED Indication – Standard Right/Left
Pushbutton Configuration
Set pushbutton toggled function (latching output relay) with LED
indications. LED 1 ~ 4 shown inside the shaded box illustrates
which LED on the transmitter lights up when the designated
pushbutton is pressed.
Function
Number
Display Type
PB1
PB2
PB3
PB4
1
1 Red
Normal
Normal
Normal
LED 4
2
2 Reds
Normal
Normal
LED 3
LED 4
3
3 Reds
Normal
LED 2
LED 3
LED 4
4
4 Reds
LED 1
LED 2
LED 3
LED 4
Function
Number
Display Type
PB5
PB6
PB7
PB8
5
5 Reds
Normal
Normal
Normal
LED 4
6
6 Reds
Normal
Normal
LED 3
LED 4
7
7 Reds
Normal
LED 2
LED 3
LED 4
8
8 Reds
LED 1
LED 2
LED 3
LED 4