Instruction Manual

Flex 12EPV/8EPV Standard, AB and Tandem Instruction Manual (FCC/CE)
September 2016
Page 27 of 43
6. General Specifications
Frequency Range : 433MHz ~ 440MHz (FCC)
863MHz ~ 870MHz (CE)
Number of Channels : 141 channels(FCC)/62 channels(CE)
Channel Spacing : 50K(FCC) / 100 KHz(CE)
Modulation : Digital Frequency Modulation based
on Manchester Code, 20bit address,
32bit CRC and Hamming Code.
Encoder & Decoder : Microprocessor-controlled
Transmitting Range : ＞100 Meters (300 feet)
Hamming Distance : ＞6
Frequency Control : Synthesized PLL
Spurious Emission : -50dB
Antenna Impedance : 50 ohms
Responding Time : 50mS (average)
Transmitting Power : 1.0mW
Enclosure Type : NEMA4
Enclosure Rating : IP66
Output Contact Rating : 250V @ 8 Amps
Transmitter Operating Voltage : 3.0VDC @ 40mA
Receiver Power Consumption : 22VA (max)
Available Receiver Voltages : 110~240VAC , 0.3A , 50/60HZ
Operating Temperature : -25°C ~ 50°C / -13°F ~ 167°F
12EPV Transmitter Dimension : 244mm (L) x 70mm (W) x 44mm (H)
8EPV Transmitter Dimension : 198mm (L) x 70mm (W) x 44mm (H)
Transmitter Weight : 341g / 12.0oz (include batteries)
Environment Condition
a) outdoor use
b) altitude up to 2000 Meters (6500 feet)
c) Maximum Relative Humidity 90%
d) MAINS supply voltage fluctuations up to ±10%
e) OVERVOLTAGE CATEGORY II
f) WET LOCATION, applicable
g) applicable POLLUTION DEGREE of the intended environment
( POLLUTION DEGREE 2 IN MOST CASES)