Instruction Manual

Flex HANDY Instruction Manual
June 2019 v1.0
Page 16 of 34
4.1.4 Transmitter Start Function Settings
4.1.4.1 During Initial Transmitter Power On
When transmitter is powered on (Stop button elevated),
press both PB1 and PB2 at the same time or any
pushbutton to activate the receiver (MAIN relays closed).
* When set to any pushbutton activation, the system startup
time is 3 seconds after transmitter power on (Stop button elevated).
Pressing any pushbutton within this 3-sscond startup time is ineffective.
4.1.4.2 During Sleep Mode
When transmitter goes into sleep mode the system is temporarily deactivated (MAIN
relays opened). Press both PB1 and PB2 at the same time or any pushbutton to
wake up the system (MAIN relays closed).
4.1.5 Transmitter Inactivity Timer Settings
Set how long the system enters the sleep mode when the transmitter is not in use (pushbutton
not pressed). When transmitter goes into sleep mode the receiver MAIN relays are deactivated.
Dipswitch
Settings
Time
Dipswitch
Settings
Time
1
xxx000xxxx
1 minute
5
xxx100xxxx
10 minutes
2
xxx001xxxx
20 seconds
6
xxx101xxxx
30 minutes
3
xxx010xxxx
3 minutes
7
xxx110xxxx
60 minutes
4
xxx011xxxx
5 minutes
8
xxx111xxxx
Constant On
(sleep mode
disabled)
Dipswitch
Settings
Function
1
Xxxxxxxx0x
PB1 + PB2
Activation
2
xxxxxxxx1x
Any Pushbutton
Activation
Dipswitch
Settings
Function
1
xxxxxxxxx0
PB1 + PB2
Reactivation
2
xxxxxxxxx1
Any Pushbutton
Reactivation
P
RESS