Instruction Manual

Flex 12HRX/8HRX Standard, AB and Tandem Instruction Manual (FCC/CE)
September 2016
Page 15 of 43
5.2. Pre-installation Precautions
1. Make sure the transmitter and receiver are with identical serial number and channel.
2. Make sure the receiver is not set to the same channel as any other systems in use in the
surrounding area.
3. Make sure the crane or equipment is working properly prior to installation.
4. Make sure the power source to the receiver is set correctly.
5. Switch off the main power source to the crane or equipment prior to installation.
5.3. Step-By-Step Installation
Mounting Bracket Type 1
Mounting Bracket Type 2