Instruction Manual

Flex 12HRX/8HRX Standard, AB and Tandem Instruction Manual (FCC/CE)
September 2016
Page 19 of 43
7. General Specifications
Frequency Range : 433MHz ~ 440MHz (FCC)
863MHz ~ 870MHz (CE)
Number of Channels : 141 channels(FCC)/62 channels(CE)
Channel Spacing : 50K(FCC)/100 KHz(CE)
Modulation : Digital Frequency Modulation based
on Manchester Code, 20bit address,
32bit CRC and Hamming Code.
Encoder & Decoder : Microprocessor-controlled
Receiver Type : Frequency Auto Scanning
Receiver Sensitivity : -116dBm
Spurious Emission : -50dB
Antenna Impedance : 50 ohms
Enclosure Type : NEMA4
Enclosure Rating : IP66
Output Contact Rating : 12~24VDC , 1A
Receiver Power Consumption : 2.4W (max)
Available Receiver Voltages : 12~24VDC , 2A
Operating Temperature : -25°C ~ 50°C / -13°F ~ 167°F
Receiver Dimension : 197mm (L) x 153mm (W) x 50mm (H)
Receiver Weight : 1.36kg / 2.99lb (include output cable)
Environment Condition
a) outdoor use
b) altitude up to 2000 Meters (6500 feet)
c) Maximum Relative Humidity 90%
f) WET LOCATION, applicable
g) applicable POLLUTION DEGREE of the intended environment
( POLLUTION DEGREE 2 IN MOST CASES)