User's Manual

- 17 -
AE11GOW WMU User’s Guide
4 TECHNICAL SPECIFICATIONS
General
Power 12 VDC (±15 %)
Consumption 35 W max
Operating temperature -33 to 60° C/ -27.4 to 140°F
Dimension 30x22x14 cm / 11.81’’x8.66’’x5.51’’
Interface Description
10/100 BaseT Ethernet Auto-
MDIX Interface
Ethernet data connection to IP/Ethernet
devices
Alternatively, this LAN interface can be
used for local management of the ANI,
Itron and Microhard sub-modules (Refer
to user manuals of each manufacturers).
RS-232 RJ45 DCE (Female Type) Interface to encapsulation for serial
SCADA RTU
Baud rates – 1200 – 115,200 bps
N female connector RF Antenna Interface (50 Ohm) for
licensed 700 MHz communication
N female connector RF Antenna interface (50 Ohm)
connected to the unlicensed 900 MHz
Itron OpenWay® Cell Relay
N female connector RF Antenna interface (50 Ohm)
connected to the licensed 900 MHz
wireless gateway
Description Licensed 700 MHz Wireless Backhaul
Downstream (RX)
RF Frequency range From 757 to 758 MHz
Modulation format QPSK, 16QAM & 64QAM
Channel Bandwidth 245 & 330 KHz
Adaptive Modulation Yes
Data Rate (Raw) 0.55 – 1.65 Mbps
Bandwidth
(KHz)
64QAM 16QAM QPSK
RX sensitivity
245/330 -81 dBm -87 dBm -91 dBm
Licensed 700 MHz Wireless Backhaul
Upstream (TX)
RF Frequency range
(A band)
From 787 to 788 MHz
Modulation formation QPSK & 16QAM
RF Coverage Up to 20 miles with ANI BTS
Channel Bandwidth 250 & 325 KHz
Adaptive Modulation No
Data Rates (Raw) 0.52 – 1.04 Mbps @ 325 KHz
0.4 – 0.8 Mbps @ 250 KHz