User's Manual

Internet Settings 63
Dynamic/Fixed IP in 1483 Bridge Mode (For Multiple PCs)
Your ISP uses fixed/dynamic IP to provide the Internet connection. To
configure this function correctly, you should obtain the information on
this page from your ISP.
Figure 49 Dynamic/Fixed IP for Bridge Mode Screen
1 Select Dynamic/Fixed IP for Bridge Mode from the Protocol drop-down
menu.
2 Enter the IP address, Subnet Mask and Default Gateway information
provided by your ISP into the IP address, Subnet Mask and Default
Gateway fields.
3 Check the DNS Automatic from ISP checkbox, if your ISP automatically
configure DNS. However, if you need to configure DNS manually, enter
the IP address in the DNS Address field. (If your ISP uses a secondary DNS,
enter the IP address in the Secondary DNS Address field).
4 Enter the host name in the Host Name filed.
5 If your ISP uses DHCP to automatically assign IP addresses, check the
DHCP Client checkbox.
6 Enter the VPI and VCI parameters provided by your ISP in the VPI and VCI
fields. You can click Auto Search to automatically find out this
information.
7 Select the encapsulation type (LLC or VC MUX) in the Encapsulation field.
This information will have been provided to you by your ISP.