User's Manual

DATA SHEET
SE2565T: 2.4 GHz High Power Wireless LAN Power Amplifier
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
202424A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 25, 2012 4
Symbol Parameter Conditions Min. Typ. Max. Unit
Z
EN
Enable pin input impedance
Passive Pull
Down
10 kΩ
AC Electrical Characteristics
802.11g/n Transmit Characteristics
Conditions: VCC = EN = 3.3 V, T
A = 25 °C, as measured on Skyworks Solutions’ SE2565T-EV1 evaluation board
(de-embedded to device), all unused ports terminated with 50 ohms, unless otherwise noted.
Symbol Parameter Condition Min. Typ. Max. Unit
FIN Frequency Range - 2400 - 2500 MHz
POUT Output Power
54 Mbps OFDM signal, 64
QAM, 3% EVM
- 23 -
dBm
11Mbps CCK signal,
BT = 0.045, Mask
- 26 -
802.11n, HT20, all data
rates, Mask
- 27 -
802.11n, HT40, All data
rates, Mask
- 24 -
P
1dB
P1dB - - 30 - dBm
S21 Small Signal Gain - 30 32 - dB
ΔS21
Small Signal Gain
Variation
Gain variation over single
40MHz channel
Gain Variation over band
-
-
0.5
1.0
-
-
dB
2f
Harmonics
P
OUT = 26 dBm, 1 Mbps,
802.11b
- -50 -45 dBm/MHz
3f - -50 -45 dBm/MHz
tdr, tdf
Delay and rise/fall
Time
50 % of V
EN edge and
90/10 % of final output
power level
- 0.5 - μs
S11 Input Return Loss - 10 15 - dB
STAB Stability
CW, POUT = 26 dBm
0.1 GHz – 20 GHz
Load VSWR = 6:1
All non-harmonically related outputs less than
-42 dBm/MHz
RU Ruggedness
CW, PIN = +12dBm, Load
VSWR = 6:1
No permanent damage.