User's Manual

7
If Multicast Video (IPTV) and Internet Data
originate on SEPARATE ONT / RG ports,
refer to the instructions on the attached
addendum Segregating Video & Internet
Ports. The 2 GE GXT542U ports are factory
bridged and need to be reconfigured to
segregate these traffic types and eliminate
the potential for IP related issues.
Step 3 – Activate the Internet Wi-Fi Network
To login to the web Interface to create the Data Wi-Fi network:
A.
Follow Section 2, Step 6 C – E directions to access the AP
web interface
B. Click on the Data Wireless Setup menu item on the left
C. Check the box and click Apply to enable the Data network
D. Confirm the screen displays the Data wireless network
Congratulations! You have activated and installed the Gigabit Wi-Fi
Internet network. Connect any 5 GHz 11ac or 11n device to the
Internet SSID using the passphrase below to access the internet.
e default passphrase for connecting to the Data Wi-Fi
Network is the last 8 digits of the AP’s MAC address printed
on the bottom.