Owner's Manual

E-25
English
2
Toggles power between standby and on.
1
Open/close disc tray.
0...9
Searches for and plays the track
corresponding to the key pressed.
DISP
Cycles through the front panel display’s
brightness options.
MODE
Cycles through the repeat options (track,
disc, etc.).
7
Fast rewind.
8
Fast forward.
9
Press and release to skip back to the
beginning of the current/previous track
:
Press and release to skip forwards to the
beginning of the next track.
Stop playback of a CD
4;
Pause and playback of the current track.
POP UP
In ‘normal play’ (i.e. the display does not
show the letter P), press the
'
and
,
keys to select the track and then MENU stores
the track.
In ‘program play’ mode, the MENU key
deletes the stored track.
Navigate setup and CD programme
selection menus.
OK selects the highlighted le or enters
the highlighted menu on the screen –
equivalent to ‘Enter’ or ‘Select’ on some
remote controls.
'
Up
<
Le
>
Right
,
Down
CD +
'
Power on from Standby
CD +
,
Standby from Power on.
AMP
Resets remote to AMP mode.
RADIO
Plays the programmed tracks.
CD Device Mode
e CD Device Mode button selects CD as the source.
e button is congured to control the CD functions of
Arcam CD players, although this can be changed (see
“Locking/Unlocking a specic Device Mode” on page
E-39).