Owner's Manual
Table Of Contents
- Handbook
- Factory Default Reset
- Important safety instructions
- Contents
- Before you begin…
- Rear panel connectors
- Audio/video connections
- Radio connectors
- Other connectors
- Speakers
- Operation
- Front panel operation
- Remote control
- Essential setup
- Auto speaker setup
- Setup menus
- Decoding modes
- Tuner operation
- Network/USB operation
- Multi-room set up
- Customising the remote
- Troubleshooting
- Specs
- Product guarantee
- Device Code Tables
E-42
Continual improvement policy
Arcam has a policy of continual improvement for its
products. is means that designs and specications
are subject to change without notice.
specifications
AV860
Stereo line inputs
Maximum input 4.5V rms
Nominal sensitivity 1V, 2V, 4V (user adjustable)
Input impedance 47kΩ
Signal/noise ratio (A-wtd ref 100W) normal/stereo direct 100dB/110dB
Frequency response 20Hz—20kHz ± 0.1dB
Preamplier outputs
Nominal output level 1V RMS / 2V RMS
Output impedance 560Ω
THD+N (20Hz—20kHz) –100dB
Headphone output
Maximum output level into 32Ω 2Vrms
Output impedance <5Ω
General
Mains voltage 110–120V or 220–240V, 50 –60Hz
Power consumption (maximum) 50W (ermal dissipation approx. 170 BTU/hour)
Power consumption (idle, typical) 50W (ermal dissipation approx. 170 BTU/hour)
Power consumption (standby) <0.5W
Dimensions
W x D (including speaker terminals) x H (including feet)
433 x 425 x 171mm
Weight (net) 10.25kg
Weight (packed) 14.25kg
Supplied accessories Mains lead
Remote control
2 x AAA batteries
Manual
DAB/FM aerial
Calibration microphone
USB cable
E&OE
NOTE: All specication values are typical unless otherwise stated.