Owner's Manual
Table Of Contents
- Handbook
- Factory default reset
- Safety Guidelines
- Welcome
- Contents
- Before You Begin
- Trademark Acknowledgments
- Rear Panel Connections and Controls
- Audio/Video Connections
- Connection Guide
- Radio & Wireless Audio Connectors
- Other Connectors
- Speakers
- Connecting Speakers
- Operation
- Extended front panel menu
- Front Panel Operation
- Remote Control
- Device Mode/Source keys
- Customising the Remote
- Essential Setup
- Auto Speaker Setup
- Setup Menus
- Connecting to a Network
- Decoding Modes
- Tuner Operation
- Troubleshooting
- Specifications
- Device Code Tables
- Custom Installation Notes
- Contents
- Introduction
- Set-up
- Conventions
- Serial Cable Specification
- Example command and response sequence
- System Command Specifications
- Input Command Specifications
- Output Command Specifications
- Menu Command Specifications
- Setup Adjustment Command Specifications
- Treble Equalisation (0x35)
- Bass Equalisation (0x36)
- Room Equalisation (0x37)
- Dolby Volume (0x38)
- Dolby Leveller (0x39)
- Dolby Volume Calibration Offset (0x3A)
- Balance (0x3B)
- Subwoofer Trim (0x3F)
- Lipsync Delay (0x40)
- Compression (0x41)
- Request incoming video parameters (0x42)
- Request incoming audio format (0x43)
- Request incoming audio sample rate (0x44)
- Set/Request Sub Stereo Trim (0x45)
- Set/Request Zone 1 OSD on/off (0x4E)
- Set/Request Video Output Switching (0x4F)
- Set/request input name (0x20)
- FM Scan up/down (0x23)
- DAB Scan (0x24)
- Heartbeat (0x25)
- Reboot (0x26)
- Bluetooth status (0x50)
- Setup (0x27)
- Room EQ name(s) (0x34)
- Now Playing Information (0x64)
- Input config (0x28)
- General Setup (0x29)
- Speaker Types (0x2A)
- Speaker Distances (0x2B)
- Speaker Levels (0x2C)
- Video Inputs (0x2D)
- HDMI settings (0x2E)
- Zone settings (0x2F)
- Network (0x30)
- Bluetooth (0x32)
- Engineering menu (0x33)
- AV RC5 command codes
- Product Info
- Mandatory Software Update
- Software Release Notes
- Warranty & Product Registration
30
Data21
Data22
Data23
Data24
Data25
Data26
Data27
Data28
Data29
Data30
Data31
Data32
Data33
Interlaced flag:
0x00 – Progressive
0x01 – Interlaced
Aspect ratio:
0x00 – Undefined
0x01 – 4:3
0x02 – 16:9
Colour space
0x00 - normal
0x01 - HDR10
0x02 - Dolby Vision
0x03 - HLG
0x04 - HDR10+
Audio compression
0x00 - Off
0x01 - Medium
0x02 - High
Balance
0x00 — 0x06 – Balance is 0 — 6
0x81 — 0x86 – Balance is -1 — -6
Dolby centre spread
0x00 - Enable
0x01 - Disable
DTS Dialogue Control
0x00 — 0x06 – DTS Dialog Control is 0 — 6
Maximum volume
0x00 (0) – 0x63 (99)
Maximum on volume
0x00 (0) – 0x63 (99) – Set the volume
Display on time
0x00 - 5 seconds
0x01 - 10 seconds
0x02 - 30 seconds
0x03 - 1 minute
0x04 - Always on
Control option
0x00 - Off
0x01 - RS232
0x02 - IP
Power on option
0x00 - Last state
0x01 - Standby
0x02 - On
Language
0x00 - English
0x01 - Francsis
0x02 - Deutsch
0x03 - Espanol
0x04 - Nederlands
0x05 - Pусский
0x06 - 中文
Data13
Data14
Data15
Data16-20
Incoming audio sample rate:
0x00 – 32 KHz
0x01 – 44.1 KHz
0x02 – 48 KHz
0x03 – 88.2 KHz
0x04 – 96 KHz
0x05 – 176.4 KHz
0x06 – 192 KHz
0x07 – Unknown
0x08 – Undetected
Incoming bitrate
0x00 - 32kbps
0x01 - 56kbps
0x02 - 64kbps
0x03 - 96kbps
0x04 - 112kbps
0x05 - 128kbps
0x06 - 192kbps
0x07 - 224kbps
0x08 - 256kbps
0x09 - 320kbps
0x0A - 384kbps
0x0B - 448kbps
0x0C - 512kbps
0x0D - 576kbps
0x0E - 640kbps
0x0F - 768kbps
0x10 - 960kbps
0x11 - 1024kbps
0x12 - 1152kbps
0x13 - 1280kbps
0x14 - 1344kbps
0x15 - 1408kbps
0x16 - 1411.2kbps
0x17 - 1472kbps
0x18 - 1536kbps
0x19 - 1920kbps
0x1A - 2048kbps
0x1B - 3072kbps
0x1C - 3840kbps
0x1D - Open
0x1E - Variable
0x1F - Lossless
Dialnorm
0x00 (0dB) - 0x1F (31dB)
Incoming video resolution (returns 0x00 x 5 if no input)
Horizontal resolution MSB (e.g. for 720p: 0x05 since 1280 = 0x0500)
Horizontal resolution LSB (e.g. for 720p: 0x00 since 1280 = 0x0500)
Vertical resolution MSB (e.g. for 720p: 0x02 since 720 = 0x02D0)
Vertical resolution LSB (e.g. for 720p: 0xD0 since 720 = 0x02D0)
Refresh rate for full image update (half the field rate for interlaced signals)
(e.g. for 50Hz progressive: 0x32)