Owner's Manual
Table Of Contents
- Handbook
- Factory default reset
- Safety Guidelines
- Welcome
- Contents
- Before You Begin
- Trademark Acknowledgments
- Rear Panel Connections and Controls
- Audio/Video Connections
- Connection Guide
- Radio & Wireless Audio Connectors
- Other Connectors
- Speakers
- Connecting Speakers
- Operation
- Extended front panel menu
- Front Panel Operation
- Remote Control
- Device Mode/Source keys
- Customising the Remote
- Essential Setup
- Auto Speaker Setup
- Setup Menus
- Connecting to a Network
- Decoding Modes
- Tuner Operation
- Troubleshooting
- Specifications
- Device Code Tables
- Custom Installation Notes
- Contents
- Introduction
- Set-up
- Conventions
- Serial Cable Specification
- Example command and response sequence
- System Command Specifications
- Input Command Specifications
- Output Command Specifications
- Menu Command Specifications
- Setup Adjustment Command Specifications
- Treble Equalisation (0x35)
- Bass Equalisation (0x36)
- Room Equalisation (0x37)
- Dolby Volume (0x38)
- Dolby Leveller (0x39)
- Dolby Volume Calibration Offset (0x3A)
- Balance (0x3B)
- Subwoofer Trim (0x3F)
- Lipsync Delay (0x40)
- Compression (0x41)
- Request incoming video parameters (0x42)
- Request incoming audio format (0x43)
- Request incoming audio sample rate (0x44)
- Set/Request Sub Stereo Trim (0x45)
- Set/Request Zone 1 OSD on/off (0x4E)
- Set/Request Video Output Switching (0x4F)
- Set/request input name (0x20)
- FM Scan up/down (0x23)
- DAB Scan (0x24)
- Heartbeat (0x25)
- Reboot (0x26)
- Bluetooth status (0x50)
- Setup (0x27)
- Room EQ name(s) (0x34)
- Now Playing Information (0x64)
- Input config (0x28)
- General Setup (0x29)
- Speaker Types (0x2A)
- Speaker Distances (0x2B)
- Speaker Levels (0x2C)
- Video Inputs (0x2D)
- HDMI settings (0x2E)
- Zone settings (0x2F)
- Network (0x30)
- Bluetooth (0x32)
- Engineering menu (0x33)
- AV RC5 command codes
- Product Info
- Mandatory Software Update
- Software Release Notes
- Warranty & Product Registration
ARCAM
MANDATORY SOFTWARE UPDATE
Dear Arcam Owner,
Thank you for purchasing this Arcam product and being one
of
the first
in
the world to
own the very latest generation
in
a long history
of
class-leading AV equipment. We are
confident that you will enjoy many years
of
listening and viewing pleasure from its use.
As you may have noticed the box
of
your new Arcam product was opened. Our ware-
house team
in
Louisville, Kentucky have opened every Arcam product to insert a USB
STICK with a very important software update that needs to be done prior to setting the
product
up
for operation. Please read the supplied instructions carefully and if you have
questions, please contact our tech support team at 888-691-4171.
There
is
also a video at http://www.arcamupdate.co.uk/videos/Arcam_AVR_update.mp4
Please also register your ownership
of
this product with us at www.arcam.co.uk -
follow the link to product registration. This website
is
also
an
excellent place to learn
more about complementary Arcam products as well as future news and upgrades to
your new Arcam product.
With best regards,
Nicholas Clarke
Senior Director, Global Engineering, Luxury Audio
The West Wing, Stirling House, Waterbeach, Cambridge,
CB25
9PB
England.
Tel:
+44 (0)1223 203200
www
.arcam.co.uk