User Manual

EN-10

Audio/Video Connections

Before connecting your Receiver to your source components

and speakers, please read through the next few pages which

will explain all the input and output connectivity that is

available. The ‘Speakers’ section explains how to connect up

your speakers to avoid damage to the ampliﬁer and how to

arrange your speakers for best performance.

General

The inputs are named to make it easier to reference

connected devices (e.g. ‘ ’ or ‘ ’). They all have the same

input circuit, so there is no reason why you should not

connect a diﬀerent device to any of the inputs. For example,

if you had two BD players and the AV input was not being

used, then the second BD player could be connected to the

AV input.

When connecting a video source, its audio must be

connected to the corresponding sockets. For example, if you

had a satellite decoder plugged into a video input, the

audio must be connected to the audio inputs!

Making Connections

 Take care to place cables as far from any power

supply cabling as is practicable, to reduce hum and