User Manual
EN
EN-15
Speakers
The AVR10/AVR20/AVR30/AV40 allows you to connect
up to sixteen speakers. The AV40 needs additional power
amplifiers for all channels. The AVR10/AVR20/AVR30 has
7 channels of amplification. 5 channels of amplification
correspond to speakers installed in the front left, centre, front
right, surround left, surround right. The remaining 2 channels
of amplification can be assigned as:
bi-amp the front left and right
surround back left and surround back right
height 1 left and right
Zone 2 left and right (AVR20, AVR30, AV40)
Height front left, height front right, height back left, height
back right and five more additional speakers can be attached
using an additional power amplifier, see page EN-16 for more
information.
With the addition of correctly installed and configured
height channels, Dolby Atmos for the home, DTS:X or Auro
3D brings the ultimate cinema sound experience to your
home theatre to create powerful, moving audio that flows
around you.
The conguration and placement of your speakers
is very important. All speakers, with the exception of
the subwoofer(s), should be arranged around your normal
viewing/listening position. The subwoofer should be placed
in a position which gives an even frequency response in all
listening positions. Incorrect placement leads to bass boom
in some areas. Often the only way to find a good position
for your subwoofer(s) is by experimentation. A good place
to start experimenting is close to a wall but at least 1m
away from any corners. You can also consult your subwoofer
handbook for placement suggestions.