Operation Manual

E-7E-6
English
A49
connections
Note
Please read the ‘Placing the unit’, ‘Power’ and
‘Interconnect cables’ sections on page5 before
connecting up your A49 integrated amplier!
PHONO
GROUND
ONLY
PHONO
(MM)
CD TUNER SAT BD PVR AV
RECORD
OUT
PRE
OUT
R
4–16 OHMS. CLASS 2 WIRING
SPEAKER 1 SPEAKER 2
L
4–16 OHMS. CLASS 2 WIRING
SPEAKER 2 SPEAKER 1
AUX R AUX L PRE OUT R PRE OUT L
TRIGGER OUT
6V 1A 12V 1.5A
ACCESSORY
POWER
110-120V/220-240V
~ 50-60 Hz
350W MAX
POWER INLET
SUPPLY
VOLTAGE
SWITCH POSITIONS
115 = 110 - 120V~
230 = 220 - 240V~
PHONO 20
PHONO AUX CD TUNER SAT
MUTE
DISPLAY
BALANCE
BD PVR AV SP1 SP2 PHONES
POWER
POWER / STANDBY
Voltage select
Ensure that the voltage selected
matches your local power supply.
Power inlet
Connect the correct
mains cable here.
Record output
RECORD OUT is a line level output for
use in recording from other sources.
See page11 for more information.
Trigger output
TRIGGER OUT allows the A49 to control the
power state of any connected equipment,
such as a P49/P349 power amplier. In
normal use there is no need to make any
connections to these outputs.
Phones
3.5mm stereo jack socket,
intended for use with a set of
headphones. See page11 for
more information.
Speaker terminals
e A49 is equipped with two
pairs of speaker terminals. See
page15 for information on
connecting loudspeakers.
Phono earth terminal
For connecting your turntable
earth lead, if required.
Note that this terminal must
not be used as a safety earth.
Accessory power
6V 3.5mm mono jack socket for accessory cable
(supplied). Cable provides two 2.1mm DC jacks
to power 6V r series accessories.
12V 2.5mm DC jack socket for accessory cable
(supplied). Cable provides a 2.5mm DC jack to
power 12V r series accessories.
Pre-amplier output
PRE OUT provides the pre-amp output for
use in a bi-amplied system (for example,
with a P49/P349 power amplier). See
page11 for more information.
Audio inputs
AUX, Tuner, SAT, BD,
PVR and AV are all
line-level inputs.
See page10 for
more information.
PHONO (MM)
has dierent
characteristics. See
page20 for the phono
input specication.
Balanced XLR audio outputs
Provides a balanced pre-out for use
in a bi-amplied system (for example
with a P49/P349 power amplifer). See
page11 for more information.
Balanced XLR audio inputs
Use these sockets to connect to your
source component if the source has
balanced XLR outputs. If your source
component has unbalanced outputs,
use the phono inputs. For more
information see page10.
C49
connections
Note
Please read the ‘Placing the unit’, ‘Power’ and
‘Interconnect cables’ sections on page5 before
connecting up your C49 pre-amplier!
PHONO
GROUND
ONLY
PHONO
(MM)
CD TUNER SAT BD PVR AV
RECORD
OUT
PRE
OUT
AUX R AUX L PRE OUT R PRE OUT L
TRIGGER OUT
6V 1A 12V 1.5A
ACCESSORY
POWER
110-120V/220-240V
~ 50-60 Hz
350W MAX
POWER INLET
SUPPLY
VOLTAGE
SWITCH POSITIONS
115 = 110 - 120V~
230 = 220 - 240V~
PHONO 20
PHONO AUX
CD TUNER
SAT
MUTE
DISPLAY
BALANCE
BD
PVR
AV
PHONES
POWER
POWER / STANDBY
Voltage select
Ensure that the voltage selected
matches your local power supply.
Power inlet
Connect the correct
mains cable here.
Record output
RECORD OUT is a line level output for
use in recording from other sources.
See page11 for more information.
Trigger output
TRIGGER OUT allows the C49 to control the
power state of any connected equipment,
such as a P49/P349 power amplier. In
normal use there is no need to make any
connections to these outputs.
Phones
3.5mm stereo jack socket,
intended for use with a set of
headphones. See page11 for
more information.
Phono earth terminal
For connecting your turntable
earth lead, if required.
Note that this terminal must
not be used as a safety earth.
Pre-amplier output
PRE OUT provides an unbalanced output
for connection to a power amplier (for
example a P49/P349). See page11 for
more information.
Audio inputs
AUX, Tuner, SAT, BD,
PVR and AV are all
line-level inputs.
See page10 for
more information.
PHONO (MM)
has dierent
characteristics. See
page21 for the phono
input specication.
Balanced XLR audio outputs
Provides a balanced output for
connection to a power amplier (for
example a P49/P349). See page11 for
more information.
Balanced XLR audio inputs
Use these sockets to connect to your
source component if the source has
balanced XLR outputs. If your source
component has unbalanced outputs,
use the phono inputs. For more
information see page10.
Accessory power
6V 3.5mm mono jack socket for accessory cable
(supplied). Cable provides two 2.1mm DC jacks
to power 6V r series accessories.
12V 2.5mm DC jack socket for accessory cable
(supplied). Cable provides a 2.5mm DC jack to
power 12V r series accessories.