Compact disc player CD33
Safety guidelines 9. Power sources SAFETY INSTRUCTIONS Only connect the appliance to a power supply of the type described in the operating instructions or as marked on the appliance. This product is designed and manufactured to meet strict quality and safety standards. However, you should be aware of the following installation and operation precautions: 10.
Using this handbook This handbook has been designed to give you all the information you need to install, connect, set up and use the Arcam FMJ CD33 Compact Disc player. The remote control handset supplied with the equipment is also described. CONTENTS Safety guidelines.............................................................................. 2 Safety instructions...................................................................................2 Safety compliance........................................
Installation 230V AUDIO OUTPUTS L DIGITAL OUTPUTS POWER INLET 1 R 1 CO-AXIAL REMOTE IN 2 OPTICAL 2 3 4 5 1 2 3 4 5 POSITIONING THE UNIT Power inlet, with voltage indicator Coaxial digital output Optical digital output Twin audio outputs Remote input CONNECTING TO A POWER SUPPLY Always place the CD player on a level, firm surface.
Using your CD player CD33 COMPACT DISC PLAYER LOAD POWER PLAY STOP PAUSE POWER COMPACT DISCS WITH TEXT Press this button to switch the CD player on and off. When first powered up with no CD installed the display shows: LOAD You will see the total number of tracks and the total disc time with ‘CD TEXT’ illuminated in the display.The artist and album title scrolls across the display before returning to show the artist and total number of tracks.
Using the remote control CD/DVD Ensure that CD mode is selected using the CD/DVD toggle button. The ‘CD’ LED above the CD/DVD button is lit briefly when CD mode is selected. DISP Turns the display on or off. Turning the display off generally produces a slight improvement in sound quality. A–B This button enables you to repeat any section of music within a track. Whilst the disc is playing, press the ‘A–B’ button at the start of the section you wish to repeat.
Technical specifications Digital to Analogue conversion NOTE: All specification values are typical unless otherwise stated. High performance 192kHz 24-bit sample rate converter and multiple 24-bit digital to analogue conversion CONTINUAL IMPROVEMENT POLICY Laser pick-up 3 beam Laser wavelength 780nm Numerical aperture 0.45 Dynamic range (unweighted) >93dB * Signal to noise ratio 113dB RADIO INTERFERENCE Harmonic distortion (0dB, 1kHz) <0.003% * Frequency response (±0.
PEMBROKE AVENUE, WATERBEACH, CAMBRIDGE CB5 9QR, ENGLAND telephone +44 (0)1223 203203 fax +44 (0)1223 863384 email support@arcam.co.uk website www.arcam.co.
