Specifications

DV78
22
English
DV78
23
Technical specications
General
Power Requirements 100/115V or 230V AC, set by voltage selector switch on rear panel
Power consumption < 35 VA
Dimensions 435mm x 80mm x 350mm
Weight net: 5.2kg; packed: 8.0kg
Video outputs
Composite video 1 x gold plated phono. 1V pk-pk in 75Ω
S-Video 1 x 4-pin mini-DIN. Y 1V pk-pk in 75Ω, C 0.3V pk-pk in 75Ω
Component video Interlaced or Progressive
3 gold plated phono sockets. Y 1V pk-pk in 75Ω, Pb 0.7V pk-pk in 75Ω,
Pr 0.7V pk-pk in 75Ω
SCART socket with RGB video All 0.7V in 75Ω, composite video 1V in 75Ω, and stereo audio
Auto switching of TV with aspect ratio control
Audio outputs
Analogue audio outputs Stereo outputs on gold plated phono sockets
Output level 2.2V rms at 0dB signal, 4V rms with HDCD discs
Frequency response 20Hz to 20kHz (+0.1db, –0.5dB)
THD+N <0.005% for 1kHz 0dB signal, measured 22Hz–22kHz, unweighted
Signal-to-noise ratio 105dB, measured 20Hz–20kHz, unweighted
Digital audio output (IEC958) PCM/Dolby digital/MPEG/DTS on gold plated phono (coax) and TOSLINK (optical)
Accessories supplied
Remote control
2 x AAA batteries
mains lead
E&EO
Continual improvement policy
Arcam has a policy of continual improvement for its products.
This means that designs and specications are subject to
change without notice.
NOTE: All specication values are typical unless otherwise
stated.
Downloaded From Disc-Player.com Arcam Manuals