User manual
![](/manual/arcam/dvd-player-dv135/user-manual-english/images/img-8.png)
DV135
E-8
CR-515 remote control
DISP (display)
Press to cycle through the front panel display’s
brightness options (dim to bright, off).
CLEAR
Use CLEAR to clear a numeric eld.
Numeric keys
Gives direct access to individual tracks on audio
CDs. For tracks greater than 9, enter the digits in
sequence. For example, to play track 15, press 1,
then 5, then OK.
HDMI
Selects the picture resolution for HDMI output.
MUTE
Press once to mute an Arcam amplier. Press
again (or use +/– volume) to un-mute.
OPEN
Opens and closes the disc tray
Page Up/Down (DVD-audio)/
Slow play (other discs)
DVD-audio: Some DVD-audio discs allow the user
to browse through images (photographs of the
artist, lyrics, etc.) while music is being played. Use
the
3
or
4
buttons to change to the previous/
next page. Note that this is not available on all
DVD-audio discs.
Other discs: Press
3
or
4
on the remote control
to play slow forward or backwards. Press the
button repeatedly to cycle through the different
speeds. To resume normal playback speed, press
PLAY.
Note that slow-play does not apply to audio CDs or
DVD-audio discs.
Navigation buttons
Arrow buttons allow navigation around the Basic
and Advanced Set-up menus on the DV135.
Conrm a selection by pressing OK.
Playback control
Pause (
;
), Play (
4
) and Stop (
<
).
Fast play and Skip chapter/tracks
Play fast (
7
8
) and Skip (
0
/
) chapters/tracks
in both directions.
Advanced controls
These buttons are described on the next page.
On/Standby
This allows the DV135 to be put into and taken out
of stand-by remotely.
MENU
Activates the DVD menu if available. Adds/Clears
tracks to programme (not SACD).
SETUP
Ensure no disc is playing and press SETUP to
access the ‘Setup’ menu.
Press SETUP a second time to exit the setup menu.
SRCH (search)
Displays Search menu with Time, Title and Track
options.
STATUS
Press STATUS to give play status information about
the current disc. Press STATUS again to close the
status display.
The status information displayed varies depending
on the type of disc – DVD, CD or VCD.
*
This button is not currently used.
The CR-515 is a remote control designed for use
with Arcam DVD players. Some owners may wish to
use a dedicated remote in preference to a Universal
remote control.
input on the rear of the player
the AAA batteries
Volume +/–
Adjusts the volume on Arcam remote-controllable
ampliers.
Note that the volume (+/–) controls and MUTE
button have no effect on the audio output level of
the DVD players.