User Manual

EN
EN-9
Rear Panel Connections
ANALOGUE OUTPUTS
Single ended and balanced
analogue audio outputs. See
“Analogue Audio Outputs” on page
EN-10.
DIGITAL AUDIO INPUTS
Optical and coaxial digital audio
connectors. See “Digital Audio
Inputs” on page EN-10.
NETWORK
Connect this socket to a port on your
network router using an Ethernet patch
cable. See “Connecting to a Network” on
page EN-11 for details of how to connect to
a network.
NOTE: The use of a screened ethernet cable
is strongly recommended.
RS232
This connection allows for remote
control from a third-party home
automation system. See “Home
Automation Control” on page EN-10.
Please read the sections “Placing The Unit”, “Power” and
“Interconnect Cables” on page EN-6 before connecting
your ST60!
POWER INLET
Connect the correct mains cable
here.
USB Type A
This USB socket is used playback
of audio files from USB drives. Can
also be used to perform software
updates.
DIGITAL AUDIO OUTPUTS
Optical and coaxial digital audio
output connectors. See “Digital
Audio Outputs” on page EN-10 and
“Digital Output” on page EN-13
NOTE: the ST60 digital output is
disabled by default.
WiFi ANTENNA
Install WiFi antenna here if wireless
network connection is required.
See “Connecting to a Network” on
page EN-11 for details of how to
connect to a wireless network.
POWER INLET
110-120V/220-240V ~ 50/60Hz
200W MAX
RS232
NET
USB
5V 100mA
R
L
DIGITAL IN
WiFi ANTENNAWiFi ANTENNA
3 4
1
2
DIGITAL OUT
R
L
ANALOGUE OUT