User manual
14
Technical specifi cations
NOTE: All specification values are typical unless otherwise stated.
CONTINUAL IMPROVEMENT POLICY
Arcam has a policy of continual improvement for its products. This
means that designs and specifications are subject to change without
notice.
A32 P35
Continuous power output (20Hz—20kHz at 0.5% THD), per channel
Both channels, 8Ω, 20Hz—20kHz 100W 100W
Single channel, 8Ω, 20Hz—20kHz 150W 150W
Both channels, 4Ω, 20Hz—20kHz 140W 140W
Single channel, 4Ω, at 1kHz 200W 200W
Three channels, 8Ω, 20Hz—20kHz – 90W
Harmonic distortion, 80% power, 8Ω at 1kHz 0.005% 0.005%
Inputs
Phono cartridge:
Input sensitivity 2.7mV (MM); 270µV (MC) –
Input impedance 47kΩ (MM); 300Ω (MC)
Signal/noise ratio (CCIR) –79dB (MM); –73dB (MC)
Overload margin 35dB –
Line and tape inputs:
Nominal sensitivity 250mV—2V 800mV
Input impedance 22kΩ 22kΩ
Signal/noise ratio (CCIR) –103dB –110dB
Tone controls, max. boost/cut ±12dB @ 80Hz and 12kHz –
Power amplifi er input
Nominal sensitivity 800mV 800mV
Input impedance 22kΩ 22kΩ
Gain 31dB 31dB
Preamplifi er output
Nominal output level 700mV –
Maximum output level 8V RMS –
Output impedance <50Ω –
Headphone output
Maximum output level into 600Ω 8V –
Output impedance 100Ω –
General
Mains voltage 230V±12%; 115V±12% 230V±12%; 115V±12%
Power consumption (maximum) 800VA 800VA (950VA for P35/3)
Power consumption (standby) 2VA 2VA
Dimensions W x D x H (including feet) 430 x 370 x 110mm 430 x 350 x 110mm
Weight (net) 10.8kg 9.5kg (10.5kg for P35/3)
Weight (packed) 13kg 12.5kg (13.5kg for P35/3)
Supplied accessories mains lead mains lead
CR-389 remote control
2 x AAA batteries
E&OE