Specifications

Chalet 1800 Ins 12
FAN WIRING
Automatic
To operate the fan automatically, push the top switch on the side of the fan housing
to "AUTO" and the bottom switch to either "HIGH" or "LOW" for fan speed. This will
allow the fan to turn on as the stove comes up to operating temperature. It will also
shut the fan system off after the fire has gone out and the unit cools to below a use-
ful heat output range.
Manual
To manually operate the fan system, push the top switch to "MAN" and the bottom
switch to either "HIGH" or "LOW". This will bypass the sensing device and allow full
control of the fan. Switching from "AUTO" to "MAN" or "HIGH" to "LOW" may be
done anytime.
CAUTION: Label all wires prior to disconnection when servicing controls. Wiring
errors can cause improper and dangerous operation.
FAN OPERATION
WARNING: Electrical Grounding Instructions
This appliance is equipped with a three-pronged (grounding) plug for your protection against shock
hazard and should be plugged directly into a properly grounded three-prong receptacle. Do not cut
or remove the grounding prong from this plug.
The CHALET 1800 WOOD Fireplace Insert must be electrically grounded in accordance with local
codes or, in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70, or the
Canadian Electrical code, CSA C22.1.
120