Specifications

Chalet 1800 Ins 27
6) When both lightweight baffle plates are in, install the fourth secondary air tube with spring re-
tainer. (Photo 3)
7) After the secondary air tube is installed, reach in and pull the two halves of the lightweight
baffle plates, overlapping them and making sure they are pushed back as far as they can go.
(Photo 4) NOTE: Only Photo 4 shows the spring retainers installed
1
2
3
4
NOTE: Only use secondary air tubes designed for this appliance supplied by Archgard Ind.
The left hand side of the tubes have little
“notches” or “reliefs” cut into them
The “spring
retainers”
installed over the
air tubes