Installation Guide

www.architecturalmailboxes.com [phone]
NOTE: If you plan to install
your mailbox in a masonry
column, the flag can be
mounted directly on the
outside of the column with
masonry hardware (not
included).
Assemble the flag to the
mailbox with 2 small
washers and 2 Phillips
head screws.
1
Secure through the inside of the
mailbox with the flag adapter, 2
small washers and 2 small hex
nuts. Tighten only until snug.
2
flag adapter x1
washers x2
hex nuts x2
B
Secure through the inside of
the mailbox with 2 small
washers and 2 small hex
nuts. Tighten only until snug.
flag x1
washers x2
Phillips screws x2
2
washers x2
hex nuts x2
For Architectural Mailboxes with three flag mounting holes
C
For Architectural Mailboxes with two flag mounting holes
Assemble the flag to the
mailbox with 2 small
washers and 2 Phillips
head screws.
1
flag x1
washers x2
Phillips screws x2
© 2016, Architectural Mailboxes 5285 Rev C
Hardware (included)
x 4 small washers
x 2 small hex nuts
x 2 Phillips head screws
x 1 flag adapter
R
(Mode
Replacement Flag (Model 5285)
Installation Instructions