Installation Guide

elephantrunk

parcel drop

quick start instructions

Always home. Even when you’re not.

Model 6950

Use the Master Keys to open the unit as well as access other features that need to

be protected, such as reprogramming the keypad code, replacing batteries and

changing modes of operation. MAKE SURE YOU KEEP THESE KEYS IN A SAFE

PLACE AND DON’T GIVE THEM OUT TO OTHERS.

Install Batteries (4xAA - not included):

Using a Master key,

place the lock in

unlocked (vertical)

position.

Rear View

of Lock Assembly

Remove this screw to access the

battery compartment.

Insert batteries as shown.

Reset your Code:

With Master Key in unlocked (vertical) position,

press the red programming button.

Rear View

of Lock Assembly

Within 60 seconds, enter a new 4-digit code using 0

through 9, then press #.

Test your new code by closing the lid (it does not need to

be locked but the lid must be closed) and input your code

followed by the # key.

If your code works, the keypad will show the green light

flash twice with two beeps. If your code does not work, the keypad will display the red light and

have a long beep sound. If this occurs, try to reset your code again.

Replace the battery cover, place the lock in locked (horizontal) position, and remove Master Key.

Apply Unique Serialized Barcode:

For future compatibility with virtual signature

delivery systems, attach the barcode to the

location shown on the inside of the lid.

Your elephantrunk is ready to use. Just

put it in standby mode by closing the lid

and entering your code, then let it wait

for a delivery.