Instruction Manual

05/12/11 07:48ARCHOS 101 G9 English
Page 2 sur 16http://www.archos.com/manuals/A101G9_EN.htm
For the Flash Memory models: Use only the included USB cable to charge your device. Do not expect your device to charge properly when connected to your computer.
The ARCHOS will turn on and start charging. The battery icon will animate a blue “filling” action with a lightning bolt and the power/charge indicator light will remain
solid. When not plugged into a power adapter, the battery icon will display the amount of battery power available.
IMPORTANT: When the battery is completely empty and you plug in your device,
- The charging indicator light will turn on then start to blink within few seconds. The indicator light blinking rapidly means that the device is charging but does not yet have
enough power to start. This charging when off may take some time. Once the device has charged enough to start, it will switch on and display the ARCHOS boot logo.
- If the charging indicator does not blink after few seconds, it could mean that the battery is over discharged.
1. Plug out the power supply.
2. Press 10 seconds on the On/Off button for a hardware reset.
3. Plug in the tablet to the power supply.
After a certain period (few minutes or one hour), the charging indicator starts blinking.
THE STARTUP WIZARD
The first time you turn on the ARCHOS, the installation wizard will help you configure the main functions of your ARCHOS: language, country, time, etc.
ONLINE REGISTRATION DO NOT FORGET TO REGISTER YOUR DEVICE.
Tap the Online registration application and follow the on-screen instructions.
PRESENTATION
ARCHOS Description
Tablet with Flash memory Tablet with Hard Drive Disk
1. Power button
2. Micro-sd card slot
3. Micro-USB port
4. Microphone
5. Headphone jack
6. Mini HDMI output
7. Charging indicator
1. Power button
2. Micro-USB port
3. Microphone
4. Headphone jack
5. Mini HDMI output
6. Power connector
7. Charging indicator
8. Camera
9. Volume buttons
Main touchscreen buttons