User Manual Part 1

MANUAL V0.9
TV+
SCHEDULING A TV RECORDING > P. 67
CONFIGURING THE TV CONTROL SETTINGS
From the ARCHOS Home Screen,
select the “Settings” menu item,
and choose “TV Control” to display
the “TV Control” settings screen.
This settings screen allows you to
set the ARCHOS’ IR emitter as well
as configure the channel list.
•
•
Verifying the Channel List
From the “TV Control” screen, select “Set TV Channel List”.
Verify that the channel list on the ARCHOS is the same as on your tuner.
Here you can deselect/select a channel or change the number of a channel.
Setting the IR Emitter
The ARCHOS has a high-powered infrared LED, located on the front of the device,
at the same place as the infrared receiver (see:
Using the Remote Control ).
It allows your ARCHOS device to communicate with your tuner (VCR, cable
box, satellite receiver or Digital TV receiver), so that it can turn it on and off, and
change channels on it.
This is a one time step to set your ARCHOS device to send the correct infrared
codes to control your tuner. If you do not plan on making scheduled recordings,
then you do not need to set the infrared emitter code.
1st Test: turning your tuner off
From the “
TV Control” screen, select “Set Infrared Emitter”. This first screen al-
lows you to correctly set the codes and parameters so that the ARCHOS can turn
your tuner on/off automatically (for a scheduled recording).
1.
2.
3.
•
•
•
1.