User Manual Part 1

MANUAL V0.9
TV+
SCHEDULING A TV RECORDING > P. 68
“TV Receiver”: select the type of tuner that you want to control with the IR
Emitter (“VCR”, “Cable/DSL box”, “Satellite Receiver”, “DVD Recorder” or
“Digital TV”).
“
Receiver brand”: choose the brand of your tuner. You can use the buttons
on the remote control to scroll the list faster.
Select the “
Test power Off code” button. Make sure that your tuner is on. Your
ARCHOS device will then try to turn your tuner off. After a few seconds, your
ARCHOS will ask you if the device responded correctly:
If your tuner turned off, select “
Yes”, and move on to the next section.
If your tuner did not turn off, select “
No, try next code”. Your device will try turn-
ing the tuner off again, using a different code. Repeat this operation until the
ARCHOS manages to turn the tuner off.
If none of the codes work, check that the ARCHOS is positioned in a way that
allows the infrared signal to reach your tuner’s receiver. Note: In some rare
cases the ON/OFF functionality may not work.
2nd Test: changing channels on your tuner
After you select “Yes” at the end of the 1
st
test, the following screen appears. It allows
you to correctly set the parameters so that the ARCHOS can change channels on your
tuner (for a scheduled recording).
2.
3.
4.

