User Manual Part 11

MANUAL
V1.0
605 WIFI
INTRODUCTION > p. 6
Plug the ARCHOS USB cable into your ARCHOS,
Plug the USB end of the cable into your computer (which is turned on),
The ARCHOS will turn on and start charging:
A lightning bolt symbol will ash over the battery icon in the task bar while
the battery is charging: .
The CHG indicator LED is on while the battery is charging; it will blink when
the battery is fully charged.
You can also charge your ARCHOS device without a computer, and more rapidly, via
the optional DVR Station, Mini Dock or Battery Dock (available at www.archos.com).
See Optional Functionalities.
TURNING THE ARCHOS ON/OFF
Press and hold the button to turn your ARCHOS on/off.
The LED indicator, next to the button, lights up when the device is on.
USING THE ARCHOS INTERFACE
INTERFACE DESCRIPTION
Status Bar
In the top right corner of the screen, the status
bar indicates the volume, the battery level, the
current time of your device, etc.
Tabs
In the top left corner of the screen, the tabs area
shows other available applications and screens. They
vary, depending on where you are in the interface.
When there is only one tab available, the Tab icon
, in the top left corner, is grayed out.
1.
2.
3.
-
-