User Manual Part 12
MANUAL
V1.0
605 WIFI
CONNECTING TO A WIFI NETWORK > p. 46
You will have to specify the following settings:
“Key length” (for WEP networks only)
the authentication key can be 10 characters long (64bit) or 26 characters long
(128bit) (hexadecimal characters).
“Key” (WEP or WPA)
type in the authentication key.
you will be taken to a virtual numeric
keyboard.
type in the key and tap on “OK” when
you have nished.
-
-
-
“Authentication” (for WEP networks only)
the network’s authentication method can be based on an “Open System (de-
fault)” or a “Shared Key”.
“Conguration”
it can be “Automatic (DHCP)” or “Manual”.
if it is “Automatic (DHCP)”, then you do not have to enter any more information.
Simply use the “Connect” button, and your ARCHOS will connect to this network,
provided the signal is strong enough.
if you must congure the network manually, select the “Manual” setting. Other
parameters will appear: the required information can be obtained from the person
who manages the network.
When you have nished entering all the information, use the “Connect” button, and
your ARCHOS will connect to this network, provided the signal is strong enough.
Filtered networks: If your network manager allows only specic devices to connect
to the network (known as MAC address ltering), you can supply the network man-
ager with the MAC address of your ARCHOS. To nd out what your MAC address is,
select the “System” menu item from the Home screen, then choose “System”. See:
System Settings.
-
-
-
-
-