User Manual Part 12
MANUAL
V1.0
605 WIFI
CONNECTING TO A WIFI NETWORK > p. 43
5.
CONNECTING TO A WIFI NETWORK
Your ARCHOS can connect to a variety of wireless networks. You will nd
below the procedure to connect to these different WiFi networks.
5.1 WIFI CONNECTION PROCEDURE
ENABLING WIFI
From the Home screen, select the “Enable Wi” menu item . Your device will scan
for available WiFi networks.
The rst time you use your device, you may get a message “No congured net-
works found”. Select “View available networks”, and the list of available net-
works will be displayed.
If your ARCHOS nds networks that you have previously used and congured, it
will connect automatically to one of them.
If you get the message “Could not connect to any Wi network!”, select “View
available networks”, and the list of available networks will be displayed.
Once you are connected to a WiFi network, the status bar icon (WiFi not con-
nected) will become (WiFi connected). There is no status bar icon at all when WiFi
is not enabled.
THE LIST OF AVAILABLE NETWORKS
The list of available networks shows
all the wireless networks in range of
your device.
To refresh the list, select the “Scan
for networks” menu item.
In the list of available networks, for
each network you will see the fol-
lowing information:
•
•
•
•
•
•