User's Manual

05/12/11 07:54ARCHOS 70 User Guide
Page 5 sur 25http://www.archos.com/manuals/A70_EN_v1.1.htm
Change the Wallpaper: Tap on the menu icon and then select Wallpapers.
Move an item to another part of the screen. Hold your finger on it until it enlarges, then drag it to the
desired location (make sure there is enough space), and release it.
Make an app shortcut: Open the Applications Tab and press and hold down on one of the applications. It
will enlarge and jump to the home screen. Slide it to an empty place on one of the five home screens and
then let go.
Make a shortcut or a bookmark: Hold your finger on the screen at an empty location and then choose
from the list.
Delete a screen item: Hold down on the item until it enlarges and then drag it to the Applications Tab
which has become a trash bin.
3. MAKING A WIFI CONNECTION
When you do not need the WiFi or Bluetooth® connections, remember to deactivate them in order to
save battery power. The Power control
widget found on the far left home screen
allows you to turn the WiFi on and off
(WiFi, Bluetooth®*, Tethering, Sync,
Brightness) as needed. To configure a WiFi connection, you need to be in a WiFi zone that will allow
you to connect to it. Every time the ARCHOS is in range of a network that you have already configured
once, it will attempt to make a connection (so long as the WiFi setting is enabled).
3.1. Enabling WiFi
Before launching an Internet application such as the web browser, check to see if you already have a
connection. The icon in the top right of the screen is on when your device is connected to a WiFi
network. If not connected, you first need to activate the WiFi and configure a WiFi network.
1. Go to the Home screen, tap on the Menu icon and then select Settings.
2. In the Settings screen, select Wireless & networks.
3. If the WiFi is off, tap on the Wi-Fi line to turn it on. Then select Wi-Fi
settings. The ARCHOS will scan automatically for available WiFi networks
and show all the wireless networks in range of your device. The list is
refreshed continuously.
4. Tap on the network you want to connect to. Networks shown with the icon
are secured connections (requires a password). If it is a secured network,
tap the password field to make the keyboard appear, enter the required
network information* and then tap on Connect. Your ARCHOS will now
attempt to establish a connection to that WiFi access point with the network
parameters you entered.
* For free access WiFi points, there is no need to enter any special
information. For secured networks, you will need either a key (a series of
numbers and/or letters) of the type WEP, WPA, or WPA2, or you will need to
have a WiFi access point that uses the WiFi protection standard WPS (WiFi
Protected Setup). Check with the person who manages the WiFi network to obtain the exact connection
parameters required.
3.1.1. ADVANCED CONNECTION
To manually scan for available WiFi networks, go to the Wi-Fi settings screen, tap on the Menu icon, then