User's Manual

MANUAL

V3.0

GEN 5

TRANSFERRING FILES > P. 57

Check your manufacturer’s information to nd out whether your device is an

MSC or PTP device. Non Mass Storage Class devices such as printers, Ethernet

adapters, mice, keyboards, etc. are not supported.

TO CONNECT A USB DEVICE TO YOUR ARCHOS DEVICE:

Turn on your ARCHOS device.

Plug the ‘mini’ end of the supplied USB host adapter into the ARCHOS device (A

port).

Connect the external USB device (use a standard USB cable if needed) to the

other end of the supplied USB host adapter.

Turn on the external USB device if needed (check the documentation of your ex-

ternal USB device).

A double browser window will appear on the ARCHOS: the external USB device

will appear in the left panel, and your ARCHOS device’s hard drive in the right

panel.

Follow the instructions in the

Copying and Moving Files

section to copy your pic-

tures or les to the ARCHOS.

TO DISCONNECT:

Make sure that no transfer is being made (the HDD light should not be ickering), se-

lect the “Remove Safely...” menu item (from the “File” Browser), and simply pull out

the USB cable on either end.

Note 1: you may not always be able to copy les to your external USB device

from your ARCHOS.

Note 2: you cannot connect your ARCHOS to a computer and connect an ex-

ternal device to your ARCHOS at the same time.

•