User's Manual

4
Beta version
1
2
3
4
www
5
ENGLISH
CONNECTING TO THE WIFI
First of all, you need to configure a WiFi network. For this procedure to work, you need to be in a WiFi zone that will allow
you to connect to it. Every time the ARCHOS is in range of a network that you have already configured once, it will attempt
to make a connection.
* For free access WiFi points, there is no need to enter any special information. For secured networks, you will need either a key (a series of numbers and/or letters)
of the type WEP, WPA, or WPA2. Check with the person who manages the WiFi network to obtain the exact connection parameters required.
 Consult the full Manual to learn more about the Internet configuration.
To configure a new WiFi network, go on the Home screen, tap on the Menu icon , then select Settings .
In the
Settings screen, select Wireless & networks.
If the WiFi is off, tap on the
Wi-Fi line to turn it on. Then select Wi-Fi settings. The ARCHOS
will scan for available WiFi networks and display them at the bottom of the screen.
Tap on the network you want to connect to. Then tap inside the
Wireless password field to make the virtual key-
board appear. We recommend that you select
Show password, to be able to see the characters you are typing.
Enter the required network information*, tap on
Done, and then tap on Connect. Your ARCHOS will now at-
tempt to establish a connection to that WiFi access point with the network parameters you entered.