User's Manual

4
1
2
3
4
www
5
ENGLISH
CONNECTING TO A WIFI NETWORK
To configure a new WiFi network, go on the Home screen, tap on the Settings icon.
In the Settings screen, select Wireless & networks.
If the WiFi is off, tap on the Wi-Fi line to turn it on. Then select Wi-Fi settings. The ARCHOS will
scan for available WiFi networks and display them at the bottom of the screen.
Tap on the network you want to connect to. Then tap inside the Wireless password field to
make the virtual keyboard appear. We recommend that you select Show password, to be able
to see the characters you are typing.
Enter the required network information*, tap on Done, and then tap on Connect.
Your ARCHOS will now establish a connection to that WiFi access point.
For this procedure to work, you need to be in a WiFi zone that will allow you to connect to it. Every time the ARCHOS is in range of
a network that you have already configured once, it will attempt to make a connection.
* For free access WiFi points, there is no need to enter any special information. For secured networks, you will need either a key (a series of
numbers and/or letters) of the type WEP, WPA, or WPA2. Check with the Internet service provider to obtain the exact connection parameters.
UserGuide_Archos80 G9_book.indd 4 17/06/2011 12:57:19