User's Manual

▲

EUR

English

staRtiNg uP

Installation Wizard

The first time you start up your ARNOVA, the installation wizard will bring you through a few screens to help you set up

the principal settings: Language, country, time, etc.

Before using your ARNOVA for the rst time, completely charge the battery!

Charging the Battery

Connect the supplied power cable to the ARNOVA Power connector and to a wall outlet.

The ARNOVA device will turn on and start charging. The Power indicator light is red while the battery is charging. It will turn

yellow when the battery is fully charged.

Menu button: gives menu options according to the current screen

Back button: returns to the previous screen

On/Off button: enables to turn on or turn off the device.

Hardware Reset: In the event that your ARNOVA freezes operation, you can

press the “pinhole reset” button.

Microphone

USB Host port: to connect a keyboard, a mouse or a mass storage USB

device. Go on the Home screen, tap on the Menu icon , then select Settings/USB Mode

select.

If the Host port is off, tap on the Host port line to turn it on. Important: turn off the

Host port after use.

Mini-USB port: to connect your ARNOVA to your computer,

using the included USB cable (to transfer files)

Power connector

Headphone jack

Micro-SD card slot

Home button

When touchscreen functioning is impaired, you can recalibrate your touchscreen. If you can access the Android

interface:

1. In the device homescreen, tap on , then tap on Settings.

2. In the Settings screen, tap on Touchscreen panel calibration and follow the on-screen instructions.

If you can’t access the Android

interface, see Hardware Reset