User Manual

User's Manual
2
4. Click on the Next button. Insert USB Modem software CD-ROM or USB Modem driver
diskette.
5. Select CD-ROM drive or Floppy disk drive in the Add New Hardware Wizard window and
click the Next button. If installing from CD-ROM, specify the drivers directory when
6. The driver for USB Modem will be proposed.
7. Click on the Next button. Windows will build a database for this device.
8. Click again on the Next button to finish the installation of the USB driver.
9. Windows will then detect again a New Hardware and will install the Modem drivers.
10. At the end of this installation process, the Device Manager panel of the System
Properties will show the addition of USB Modem in the Modem section and the driver for
USB Modem in the USB section:
11. Finally, double click on the USB Modem and choose the modem folder as shown below.
12. In the Configuration section you can choose the country that you are calling from. This
way you can take the USB modem and be able to dial from any country worldwide.