User Manual

User's Manual

#VSR=? Returns “7200, 11025, 8000”

Only 7200 is currently supported

Related S-Regs: S91

#VSS Sets Silence Sensitivity (voice receive, ADPCM) (-)

#VSS=<value> [0-3] (0-Disable, 3-allow noisy conditions

#VSS? Returns the current setting

#VSS=? Returns “0-3”

Related S-Regs: S82

#VTD Sets DTMF reporting capabilities in Voice Transmit, Receive, and Voice Online Command

Modes.

#VTD=<value><value><value> [0-3F]

#VTD? Returns the current setting

#VTD=? Returns “<0-3F>,<0-3F>,<0-3F>”

Bit Settings

Bit Description

0 Disable/Enable DTMF detection

1 Disable/Enable V.25 1300 Hz detection

2 Disable/Enable T.30 1100 Hz detection (Fax)

3 Disable/Enable V.25/T.30 2100 Hz detection (Modem)

4 Disable/Enable Bell 2225 Hz detection

5 Disable/Enable Busy/Dial tone detection

6-7 reserved

Related S-Regs: S84-S86

#VTM Enables timing mark placement.

#VTM=<value> [0-10 (* 1/10 ms)]

#VTM? Returns the current setting

#VTM=? Returns “0-10”

Related S-Regs: S87

#VTS Generates a tone signal.

#VTS= [x,y,z] | {x,z} | x, ...

[x,y,z]

x represents the first frequency (Hz)

y represents second frequency (Hz)

z represents the duration (in 100 ms units)

{x,z}

DTMF Digits with Variable Duration.

x represents the DTMF digit (0-9,A-D,*,#)

z represents the duration (in 100 ms units)

DTMF Digits, with duration defined by #VBT. This is represented by a value x (non-

bracketed) corresponding to a DTMF digit (0-9,A-D,*,#, !).

Note: ‘!’ stands for flash.

#VGT Sets Playback Volume [Default 192]

#VGT=<value> [0-255 (*1/10 ms)]

#VGT? Returns the current setting