User Manual

User's Manual

#VGT=? Returns “0-255”

Related S-Regs: S74

#VTX Go to Voice Receive Mode

Result codes:

CONNECT Data may be sent

ERROR VLS=0, 4, 6 and line not connected

#SPK Sets Full Duplex Speakerphone parameters

#SPK=<mute>,<speaker>,<mic>

<mute> 0 Microphone Mute

* 1 Microphone On (default)

2 Room Monitor (mic on Max, Speaker off)

<speaker> 0-15 - 2-30 dB attenuation

* 5 - (Default)

16 - speaker mute

<mic> 0 - 0 dB gain

* 1 - 6 dB gain (Default)

2 - 9 dB gain

3 - 12 dB gain

Related S-Regs: S88-S90

AT#UD Command - Modem Diagnostics Support

Note: All the following commands will return OK

#UD Returns diagnostics data

Format:

TBD

S-Registers

The S-Registers are summarized in the following table. Registers denoted with a * may be

customized using the PTT Wizard Tool.

Factory defaults

Factory defaults are stored in the Windows OS registry. They are loaded at initialization time

or by AT commands (&F,Z). In addition the designated default profile (as specified by the Yn

command) is subsequently loaded.

The defaults shown are of the Smart Link factory settings 0 and 1.

S-Register Summary

Note: This S-register List is not to be used as is by End Users and in End User’s manuals.

For end users the contents of the first 24 S-registers should suffice.