User Manual

User's Manual
6
I5 Stored profile 0
Active Profile 0:
(Same format as above)
I6 Stored profile 1
Active Profile 1:
(Same format as above)
I7 Display stored pone numbers
(See &Z command)
Ln
*
Speaker volume
Select speaker volume.
L0 Low
L1 Low
L2 Medium
L3 High
Result codes:
OK n=0-3
Error Otherwise
Related S-Reg: S30
Mn
*
Speaker control
Select when the speaker is On/Off.
M0 Speaker always OFF
M1 Speaker ON from start of dialing until receiving carrier
M2 Speaker always ON
M3 Speaker OFF from end of dialing until receiving carrier
Result codes:
OK n=0-3
Error Otherwise
Related S-Reg: S29
Nn
*
Automode control
Enable/Disable Automode detection.
N0 Automode detection disabled. A subsequent handshake will be conducted according to the
contents of S32.
N1 Automode enabled. A subsequent handshake will be conducted according to the
Automode algorithm.
Result codes:
OK n=0 or 1
Error Otherwise
Related S-Reg: S31