Datasheet

Examples of printing
EN602A EN730 EN822
Finish Matt is standard.
Colour Call sales for custom colours.
A full range is available for large orders.
Legend printing Select from the examples or
call sales for custom legends.
Lamp voltage Call sales for details.
Blanking plates A0494 Dummy units
to fill unused panel holes.
Protective cover (designed to IP65)
Snaps on to A, L, Q or T bodies (add G after body
in cat no), this reduces maximum acceptable
panel thickness to 1.2mm.
Panel sealing washer W42 is available for the
above body sizes, this reduces maximum
acceptable panel thickness to 2mm. Covers are
not suitable for momentary types.
For all options call sales.
tel: [phone] • Arcolectric • email: [e-mail]
29
rocker
switches
A
Gloss or Matt
B
Matt only
L
Matt only
Q
Gloss or matt
R
Matt only
T
Matt only
BODY
DIMENSIONS (mm)
Panel cut-out * Bezel
OPTIONS
Panel thickness
A,Q 0.75 to 3.3mm
L,B,T 0.75 to 2.5mm
R 0.75 to 3.0mm
* For cut-out details on
momentary switches call sales.
2.0
25.3 Max
9.2
13.2
7.6
Terminal spacing - Poles 10.2 between centres
22.3/22.4
27.2
27.3
22.1/22.2
30.0
30.1
22.3/22.4
28.2
28.3
22.3/22.4
28.2
28.3
23.0/25.4
28.4
28.5
22.1/22.2
30.0
30.1
25.0
30.2
25.0
33.4
R3.5
32.0
25.0
R1.0
25.0
30.2
R1.6
28.9
33.2
30.2
25.0
R1.6
Cut-outs must be punched in the direction of insertion
plunger tube
1350 High inrush, positive break switching
The 1350 series mechanism ensures
contact welds formed at switch-on,
are positively separated by the
plunger tube acting directly on the
step in the moving contact.
step
C1350AL ---
C0480AL ---
C1550XL ---
C1553PL ---
C1553RA ---
Shown with M614 bezel cover
C0480RA ---
Shown with M614 bezel cover
C1553AA with M616 guard
Cut-out 22.0/22.1 x 29.4/29.5
Guard accepts “A” body only
Optional snap-in M441 barrier
CAT 170 P18-29 1500-6000_2:CAT 170 P18-29 1500/6000 26/11/09 09:50 Page 29