USER INSTRUCTION MANUAL Auto-Darkening Filters S540 S450 X54Vi TEL: X450V X60V X60V X35V S240 X540V X54Di iDF81 85 Independence Drive, Taunton, MA 02780 (508) 884-9600 • TOLL FREE: (800) 223-4685 • ADFILTERS-01-UI Rev C FAX: (508) 884-9666
ArcOne® auto-darkening filters protect the user against harmful ultraviolet and infrared rays, both in the dark and light state. No matter what shade the filter is set to, the UV/IR protection is always there. When used properly, the filter will prevent your eyes from being burned due to optical radiation. User’s eyes can be severely burned if welding with a damaged lens (cracked, pitted, etc.).
X450V: Press and hold the Select button, to change sensitivity from standard sensitivity to TIG; a LED will indicate when TIG and/or Delay modes are activated (see Fig 1). X54Di: Press the SENSITIVITY button to change sensitivity from standard sensitivity to TIG; an LED will indicate when TIG mode is activated (see Fig 1). Press the DELAY button to change the delay setting; an LED will indicate either FAST or SLOW. (See Fig 1).
Care and Maintenance Your new filter requires virtually no maintenance other than periodic cleaning when the lens becomes dirty or clouded from smoke. ARCONE® auto-darkening filters are water-resistant and may be cleaned by using a soft cloth with soapy water solution, or standard window cleaner. By changing cover plates frequently you will extend the life of your filter and guarantee the best operation possible.
Figure 6: Exploded Views of Select Helmets Viper® 5X4 Exploded View Hawk® 2 x 4 Exploded View -4-
Vision® 5X4 Exploded View Outside Cover Plate Mag Lens (Optional) Helmet Shell Headgear Assembly AD Filter Inside Cover Plate Table 1: Parts Selection Guide Part Number Description 02-OP-AF 0.04”Thick Inside or Outside Anti-fog Cover Plate for 4X5 or 5X4 Helmets 02-OP 03-OP 08-IP 02-HG 06-HG SPR-01 SPR-02 0.04”Thick Inside or Outside Cover Plate for 4X5 or 5X4 Helmets 0.04”Thick Inside or Outside Cover Plate for 2X4 Helmets 0.
Trouble Shooting Guide Contact ARCONE® Technical Service at (800) 223-4685 if any problem below persists after fixing. It has become difficult to see through the filter: • Clean or replace cover plates when they become dirty or discolored. • Clean auto-darkening filter with soft cloth and soapy water solution or standard window cleaner. The auto-darkening filter will not darken after striking an arc: • Clean/replace cover plate.
LIMITED WARRANTY ARCONE® warrants all digital auto-darkening filters listed in this manual for a period of three (3) years and all non-digital auto-darkening filters listed in this manual for a period of two (2) years from the date of purchase against all manufacturing defects resulting from materials or workmanship. Other components are warranted for a period of ninety (90) days.
