Installation Guide

Table Of Contents

Technical Specification

NOTE:

These products should be located and mounted

to a wall. While it is possible to mount them to any

surface, a stud or concrete mounted product will

yield the best results.

DANGER:(Risk of personal injury)

These products are not designed or intended for use

as a grab bar or support bar. Do not install any of these

products in any area where they are likely

to be used inadvertenrly as a grab bar or support bar.

To preserve the fine finish of this product, clean only with a soft

damp cloth. Dry well. Do not use commercial or abrasive cleaners.

Cleaning Instructions:

12" Towel Bar

24" Towel Bar

9" Towel Bar

24"(609)

12"(305) 9"(229)

26"(660)

14"(355)

11"(279)

Ø1.8"(45)

How To Install Towel Bar

Slide the extension of the towel bar kit onto the bracket .

Orient the screw hole of the extension downwards.

Tighten the screw with the hex wrench to secure the towel bar kit .

2.7"(68)

Ø1.8"(45)

2.7"(68)

Ø1.8"(45)

2.7"(68)

0.8"(21)

PAGE 1
Technical Specification NOTE: These products should be located and mounted to a wall. While it is possible to mount them to any surface, a stud or concrete mounted product will yield the best results. DANGER:(Risk of personal injury) These products are not designed or intended for use as a grab bar or support bar. Do not install any of these products in any area where they are likely to be used inadvertenrly as a grab bar or support bar.
PAGE 2
.7"(68) 0.8"(21) Ø1.8"(45) 2.1"(54.5) How To Install Singe Robe Hook unit:inch (mm) Slide the singe robe hook onto thebracket . Orient the screw hole of thehook downwards. Tighten the screw with the hex wrench to secure the singerobe hook. 2.7"(68) 0.8"(21) Ø1.8"(45) How To Install Towel Ring unit:inch (mm) Ø6.9"(175) Slide the towel ring onto the bracket . Orient the screw hole of the towel ring downwards. Tighten the screw with the hex wrench to secure the towel ring . 2.7"(68) 0.8"(21) 2.