Specification

ManualsBrandsARCORA ManualsBath8 in. Widespread Double-Handle Bathroom Faucet in Black and Gold

Table Of Contents

Ø1"(25)

(100mm)

Pre drilled hole size :

1.26" to 1.5"(32mm to 38mm)

Hole Size

Unsuitable sink size：

1"(25mm)

Hole Size

1.26" to 1.5"

(32mm to 38mm)

Hole Size

4"-16"

(100-400mm)

OPERATION

• Double levers style handles

• Maximum handle(s) rotation angle is 90˚ to full on

• Rotate hot side counter clockwise to open (clockwise to close)

• Rotate cold side clockwise to open (counter clockwise to close)

TWO HANDLE LAVATORY

CENTERSET FAUCETS

You may need

With 1.2 gpm are compliant with

California water effi ciency regulations,

Complies with California Proposition

65 and with the Federal Safe Drinking Water Act.

In areas with extremely low water pressure causing

the basin faucet water flow to be unsatisfactory ,

replace the 2.2 gpm aerator to improve the water flow in the basin faucet.

Cleaning and Care

Care should be given to the cleaning of this product. Although its finish is

extremely durable,

It can be damaged by harsh abrasives or polish. To clean, simply wipe gently

with a damp cloth and blot dry with a soft towel.

To READ ALL the instructions completely before beginning.

For easy installation of your faucet you will need:

To READ ALL warnings, care, and maintenance information.

Cold

Hot

Open

washer

1.2gpm aeratot

aeratot house

1.2GPM 4.5L/min

3x1.1" to 1.5"

(28mm to 38mm)

Hole Size

1.2"(30mm)

Max. deck

Thickness

3x 1.8"

(45 mm)

2.5"

(63mm)

Hot

Cold

4" to 16"

(100mm to 406mm)

9.5" to 21.5"

(240mm to 546mm)

Hot

24"(600mm)

M10x1mm

(120mm)

4.7"

(186mm)

7.3"

(105mm)

4.1"

9/16“ :"(\"

M14mm

Ø26mm Ø26mm

1 1/4''

(Ø32mm)

9.5"(240mm)

8.7"(220mm)

Ø2.2"

(56mm)

Min. 1.6"

(Ø41mm)

Hole Dia

1.1" to

2.5"

(28 to

64mm)

Summary of content (2 pages)

PAGE 1
9.5" to 21.5" (240mm to 546mm) 1.2GPM 4.5L/min You may need Hot To READ ALL the instructions completely before beginning. To READ ALL warnings, care, and maintenanceinformation. 4.7" (120mm) Cold 2.5" (63mm) For easy installation of your faucet you will need: 3x 18 . " (45 mm) 7.3" (186mm) 4" to 16" (100mm to 406mm) 4.1" (105mm) TWO HANDLE LAVATORY CENTERSET FAUCETS M14mm 1.2"(30mm) Max. deck Thickness Ø26mm 3x1.1" to 1.5" (28mm to 38mm) Ø26mm Hole Size With 1.
PAGE 2
Notes 1 1 5 Before installing the valves, clean the water pipe thoroughly to avoid dirt and deposits. 1 1 1.Remove the washer (2) , black gasket (4) and nut (5) from the assembly. 2.Slide washer (2) up to underside of flange (3). Insert flange (3) and washer (2) into sink and secure with the black gasket (4) washer and nut (5) from underneath the sink. 3.Put down and check the Springloaded stopper (1). 4. Connect assembly to drain.