Installation Guide

Operating conditions
Recommended flow temperature ≤ °65 C
Maximum flow temperature
momentary ≤ °90 C
Minimum flow pressure 1 bar
Maximum flow pressure 5 bar
Recommended operating pressure 3 bar
Test pressure 16 bar
Before installing the valves, clean the water
pipe thoroughly to avoid dirt and deposits
No te s
2310700
Installation instructions
Techni ca l da ta
8.9" 225( )
Ø1.4"(Ø35)
unit： （ ）inch mm
2.4" 62( )
14
H
C
1
3
4
5
7
8
9
10
11
13
2
6
12
1.Screw flexible hoses (14) under th e bo dy (1)
2.Attach the O-ring (3) to the base of faucet body.
3.Inse rt t he plate(4)and washer(5)under the body
4.Inse rt washer (7) and SS304 washer (8)
thro ugh th readed rod (2)
5.Screw hexagonal lock nut (9) on to threade d
rod (2) and tigh ten.
6.Screw the nut (9) with screws ( 10) to fix the
fauc et b ody (1)
7.Connec t pull-out hose (12) with washer (11) to
inlet connection(6)
8.Attach w eight (13) to pull-out hose (12)