MSDS

Material Safety Data Sheet
Material Name: Arctic Ice™ -2
____________________________________________________________
Page 2 of 4 Issue Date: 07/08/12 Revision: 1.0000 Print Date: 7/8/2012
* * * Section 6 - Accidental Release Measures * * *
Containment Procedures
Stop the flow of material, if this is without risk.
Clean-Up Procedures
Contain spill. Absorb or cover with dry earth, sand or other non-combustible material and transfer to containers for
disposal.
Evacuation Procedures
Isolate area. Keep unnecessary personnel away.
Special Procedures
Dike flow of spilled material using soil or sandbags to minimize contamination of drains, surface and ground
waters.
* * * Section 7 - Handling and Storage * * *
Handling Procedures
Avoid contact with skin and eyes. Wash thoroughly after handling.
Storage Procedures
Keep the container tightly closed and in a cool, well-ventilated place.
* * * Section 8 - Exposure Controls / Personal Protection * * *
A: Component Exposure Limits
ACGIH, OSHA, and NIOSH have not developed exposure limits for any of this product's components.
Engineering Controls
Use general ventilation.
PERSONAL PROTECTIVE EQUIPMENT
Personal Protective Equipment: Eyes/Face
Goggles or face shield with goggles, dependent upon potential exposure
Personal Protective Equipment: Skin
Use impervious gloves.
Personal Protective Equipment: Respiratory
Not normally needed.
Personal Protective Equipment: General
Eye wash fountain and emergency showers are recommended.
* * * Section 9 - Physical & Chemical Properties * * *
Appearance:
Purple liquid. White solid.
Odor:
None
Physical State:
Liquid
pH:
ND
Vapor Pressure:
24.5 torr @ 25°C
Vapor Density:
ND
Boiling Point:
>100°C (212°F)
Melting Point:
-2°C (28.4°F)
Solubility (H2O):
Negligible
Specific Gravity:
1.1@ 25°C (77°F)
Evaporation Rate:
NA
VOC:
ND
Octanol/H2O Coeff.:
ND
Flash Point:
NA
Flash Point Method:
NA
Upper Flammability Limit
(UFL):
NA
Lower Flammability Limit
(LFL):
NA
Burning Rate:
NA
Auto Ignition:
NA
* * * Section 10 - Chemical Stability & Reactivity Information * * *
Chemical Stability
This is a stable material.
Chemical Stability: Conditions to Avoid
None
Incompatibility
Avoid oxidizing agents.