User Manual

Installation
Instructions
Your installation location should meet the following
requirements:
Make sure that you install your unit on an even
surface to minimize noise and vibration.
The unit must be installed near a grounded plug,
and the Collection Tray Drain (found on the back
of the unit) must be accessible.
The unit should be located at least 30 cm (12”)
from the nearest wall to ensure proper air
conditioning. The horizontal louver blade should
be at least 50cm (19.7”) away from obstacles.
DO NOT cover the Intakes, Outlets or Remote
Signal Receptor of the unit, as this could cause
damage to the unit.
Choosing the Right Location
Recommend Installation
Note About Fluorinated Gasses
This air-conditioning unit is a hermetically sealed unit that contains fluorinated
gasses. For specific information on the type of gas and the amount, please refer
to the relevant label on the unit itself.
Service, maintenance and repair of this unit must be performed by a certified
technician.
Product recycling must be done according to local regulations.
NOTE
All the illustrations in the manual are for
explanation purpose only. Your machine may be
slightly different.
The unit can be controlled by the unit control
panel alone or with the remote controller. This
manual does not include. See the Remote
Controller Instruction for details.
50cm
19.7inch
Installation Instructions
50cm
19.7inch
Page 12