User Manual

Safety Precautions
Clean the Air Filter
Clean the Unit
Store the Unit When Not in Use
Care and
Cleaning
Maintenance Tips
Be sure to clean the air filter every
2 weeks for optimal performance.
The water collection tray should
be drained immediately after P1
error occurs, and before storage to
prevent mold.
In households with animals, you will
have to periodically wipe down the
grill to prevent blocked airflow due
to animal hair.
Always unplug the unit before cleaning or servicing.
DO NOT use flammable liquids or chemicals to clean the unit.
DO NOT wash the unit under running water. Doing so causes electrical danger.
DO NOT operate the machine if the power supply was damaged during cleaning.
A damaged power cord must be replaced with a new cord from the manufacturer.
Clean the unit using a damp, lint-free cloth and mild detergent. Dry the unit with a dry,
lint-free cloth.
Drain the unit’s water collection tray according to the instructions in the following section.
Run the unit on FAN mode for 12 hours in a warm room to dry it and prevent mold.
Turn off the unit and unplug it.
Clean the air filter according to the instructions in the previous section. Reinstall the
clean, dry filter before storing.
Remove the batteries from the remote control.
NOTE
Be sure to store the unit in a cool, dark place. Exposure to direct sunlight or extreme
heat can shorten the lifespan of the unit.
6&$/(
Upper filter
(take out)
Remove the
screw, then
take the lower
filter out.
Care and Cleaning
Page 17