Specifications

17
17
Programming
• Filter cycles
• Economy Mode
• Reminders
• Warnings
Setting lter cycles start time
The display will show the starting
hour previously set.
• Use (+) or (-) key to select hour
setting.
•
Use Right key to set minutes.
• Use (+) or (-) key to change
minutes.
• Select Next arrow on screen
menu to go to the next parameter:
lter cycle duration.
Setting cycle duration
Here we set a value for the lter
cycle duration, in hours and minutes.
• Use (+) or (-) key to set hour
setting.
• Use Right key to set minutes.
• Use (+) or (-) key to change
minutes.
• Select Next arrow on screen
menu to save changes and go to
the next parameter: lter cycle
frequency.
Programming spa system
To program the lter cycle, you must
enter these parameters: start time,
duration and frequency. During a
lter cycle, pumps run for one minute
to purge the plumbing, then Pump 1
runs for the programmed number of
hours.
• Press Mode key
• Select Options menu
• Select Spa sub-menu
• Select Filter
option
Setting Economy mode
• Select Economy
Setting Economy status
• Use (+) key to enable the economy
mode, the display will show On.
• Use (-) key to disable economy
mode, the display will show Off.
Setting Economy start time
• Select Next arrow on screen
menu to save changes and go to
economy cycle start hour.
• Use (+) or (-) key to set hour
setting.
• Use Left key to access minutes
option.
• Use (+) or (-) key to set minutes.
• Select Next arrow on screen
menu to save changes and go to
the next parameter stop economy.
Setting Economy stop time
• Use (+) or (-) key to set hour
setting.
• Use Left key to access minutes
option.
• Use (+) or (-) key to set minutes.
• Select Enter option on screen
menu to save changes and go to
back to spa options menu.
Setting maintenance reminder
prompts
This menu allows you to activate/
deactivate or simply reset the
maintenance reminder prompts.
• Select Reminder option
Turning reminders on/off
• Use (+) or (-) key to activate or
deactivate prompt(s).
• Select Next arrow on screen menu
to save changes and go to next menu
screen.
Resetting prompt messages
• Use Left or Right keys to review
one by one all active maintenance
messages.
• Select Enter option on screen
menu to reset message and view
next task or go back to main menu.
Setting lter cycle frequency
Here we se the number of ltering cycles
that the system will perfom per day.
• Use (+) or (-) key to select frequency
setting.
• Select Enter option on screen
menu to save changes and go to back
to spa options main menu.